33inch tyres on a Discovey

Just wondering whos done this and what mods had to be done to the arches? Ive got a 3inch lift and wheels work out to about -et20.

I would prefer not to use the normal plastic arches and wondered if it has been done with just a bit of cutting and flaring? Or maybe rubber "challenge" arches.

Pics would be great

f*cks sakes :doh:

they dont turn left very well

Oh and I forgot to ask for constructive replies only. Thanks.

op2:

I like tyres, they look round

Can somebody explain whats wrong with the question I asked?

I want my 33inch tyres not to rub without hacking away at the arches then covering it up with normal plastic over arches.

If somebody has any good ideas they may have done/seen then let me know. Why the sarky comments?

tyres are chunky if they're square

33 tyres are for girleys anyway

Because that's how people are on here.its not a helpfull forum unless you're in the little crowd that come on here.ive got 33s and a 4inch lift and I've had to trim the arches

adam300tdi said:

Because that's how people are on here.its not a helpfull forum unless you're in the little crowd that come on here.ive got 33s and a 4inch lift and I've had to trim the arches

Click to expand...

Exactly this. I give up with the place.

no its a helpful forum when the questions not stupid, but please let the door hit you on the way out

adam300tdi said:

Because that's how people are on here.its not a helpfull forum unless you're in the little crowd that come on here.ive got 33s and a 4inch lift and I've had to trim the arches

Click to expand...

What you on about??????

This forum's very helpful........... As long as you don't ask stupid questions that have been asked half a million times already

ricky31290 said:

Exactly this. I give up with the place.

Click to expand...

Ask stupid questions, get stupid answers! Simples!

if you let some of the air out, until they are flat at the bottom that will reduce the rubbing by at least 16.8%.

The question is asked and the same reply is given. Cut the **** out the arches then hide your shoddy workmanship with gash plastic arches. Im trying to avoid this route and seeing if anybody has successfully rolled and flared the arches or maybe there is another route I havnt thought of.

Nope ul probly have to cut them

Not everybody's done over 22000 posts in less than 3 years and probly doesn't no how people are on here

The more I look on this forum the more I realise its controlled by keyboard warriors pushing new faces away from hear. These few people who have posted 20k+ times clearly have waaaay too much time on there hands and are in no way constructive to anybody.
Its a shame as its ruining the forum for a lot of genuine people.
Idiots.

Ul be banned in a minute