jax13
New Member
- Posts
- 82
- Location
- cheshire, jnc19 M6
just changed the oil - everythings tight enough, no leaks anywhere, clean oil and plenty of it.
when the engine gets hot then i stop and start idling the oil light will come on then go off again with the slightest increase in revs.
is it possible this is just crud on the sensor (i did leave it far too long to change the oil so what was in there was like slightly runny tar) or is it possibly indicating pressure issues (indicating a gasket somewhere has gone)
any help at all appreciated on this one guys....... hoping it isn't a head gasket thing! (there wasn't any sign of water in the oil when it was changed or since)
taa!
when the engine gets hot then i stop and start idling the oil light will come on then go off again with the slightest increase in revs.
is it possible this is just crud on the sensor (i did leave it far too long to change the oil so what was in there was like slightly runny tar) or is it possibly indicating pressure issues (indicating a gasket somewhere has gone)
any help at all appreciated on this one guys....... hoping it isn't a head gasket thing! (there wasn't any sign of water in the oil when it was changed or since)
taa!