300tdi loosing coolant

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Ok so put in the uv stain this morning then unfortunately I had to go fishing to heat the motor up properly haha. Anyway it’s dark now so I had a look with the provided UV torch and to be honest it’s not very clear? There is a tiny bit of leaking at the p gasket so I’ll do that when I get a min. But most of the stain is on the other side some on the engine mounts some on the side of the sump a bit on the bottom of the vacuum pump. I really can’t see where it’s comming from... I’m now thinking it might be from the pressure cap (although that’s new) and spraying water about? I think I’ll power wash the engine bay and have another look in a day or so. It’s so frustrating grrr ducking landrovers
 
upload_2018-4-27_20-28-1.jpeg
 
It picked up a leak on a heater hose and a small p gasket leak. There is some dampness down the driver side of engine.. engine mount and side of sump but that could be oil difficult to tell. It doesn’t show up very green but a bit mabe
 
ok I had another look with the UV torch and there may be a wee leak in the bottom hose? Its one of those multi piece ones and there is coolant on the power steering hoses below the three way joint on the top of the bottom hose... but none on the hose? I have a spare in the garage somewhere so thats the next job......
 
ok I had another look with the UV torch and there may be a wee leak in the bottom hose? Its one of those multi piece ones and there is coolant on the power steering hoses below the three way joint on the top of the bottom hose... but none on the hose? I have a spare in the garage somewhere so thats the next job......
What's a multi piece one?
 
Back
Top