300TDi front axle rebuild and upgraded brakes.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes, mine are just a plain disc like the photo. I wondered what they were for. But maybe once upon a time it had tabs on it to hold the bolt heads.
 
Hey Cowasaki,

For the Swivel kit, did you buy it as a kit or as individual parts?

Alos for the previous, just checked , mine are std 1/2" socket drives. ( forget this, just realised you are talking about the SWIVEL filler plug, LOL)

Cheers
 
1/2 or 3/8 std drive size I believe.

I used to have a torque wrench that had a 1/2" hole and came with a 1/2" bar and a 1/2" to 3/8" bar but not seen any sockets unless I've just been looking in the wrong place.
Hey Cowasaki,

For the Swivel kit, did you buy it as a kit or as individual parts?

Alos for the previous, just checked , mine are std 1/2" socket drives. ( forget this, just realised you are talking about the SWIVEL filler plug, LOL)

Cheers

It's a britpart G kit which includes all OEM spec parts such as Corteco seals and Timlen bearings. britpart are a parts distributor so sell cheap parts and full spec OEM parts just check for G after the part number for best bits
 
HI Cowasaki,

That is weird , I deleted that first post a while ago, as i realised You was asking about the swivel filling point. LOL.



Do you have a number ofr the britpart kit please?

Cheers
 
HI Cowasaki,

That is weird , I deleted that first post a while ago, as i realised You was asking about the swivel filling point. LOL.



Do you have a number ofr the britpart kit please?

Cheers

DA3178G (from reading the box in the photo)

Standard kit is DA3178

Someone here is selling one but the part number seems to be ADV 3178G

http://www.ebay.co.uk/itm/DEFENDER-...842490?hash=item58df061f7a:g:H3UAAOSwRJ9Xg72y

The kit comes complete with an Original Equipment Teflon Coated Swivel Housing and all the necessary OEM seals, gaskets and washers required to rebuild the swivel housing.

Kit Contents includes:-



FRC7065 - OEM Swivel Housing- 1 ea
606666 - Swivel Pin Bearing - 2 ea
571752 - Drive Memebr Gasket- 1 ea
FTC3401 - Swivel Oil Seal - 1 ea
571755 - Plate - 1 ea
FRC2883 - Shim - 1 ea
FRC2884 - Shim - 1 ea
FRC2885 - Shim - 1 ea
FRC2886 - Shim - 1 ea
FTC3646 - Swivel to Axle Gasket - 1 ea
FTC3648 - Stub Axle Gasket - 1 ea
FTC3276 - Swivel Housing Rear Seal - 1 ea
FTC2882 - Swivel Pin Upper - 1 ea
STC3435S - Swivel Housing One Shot Grease - 1 ea
 
Last edited:
Slight delay on the axle due to finding a new house and having to sort all manner of stuff..........

Normal service will resume shortly :)
I know the feeling, we are looking for a new (old) house. I've got my milling machine and lathe disassembled as they are going to be a right pain to move and most of my 'specialist' tools are in storage with only standard spanners / sockets etc in the garage, I feel like I'm working with one arm tied behind my back when I do any jobs! :mad::mad::mad:
 
Back
Top