300TDI Clutch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

tired

New Member
Posts
128
Location
essex suffolk
Just bought a 300TDI driving home the clutch pedal went to the floor I managed to flick it back up and got going again..Got it home and found out its got a leak on the clutch damper..Question is the thread on the end of the pipe from the master cylinder going into the damper the same as the one going into the slave cylinder..thinking of bypassing the damper as a quick fix..Also the gearbox changes gears OK no crunching etc But it does have a high pitched whine in 5th gear not loud but it is there ..Is it omnious or just wanting new oil ..TIA
 
Just gone out to bypass it and the pipe going down to the damper looks like it has a female fitting on it ,The pipe going into the slave is a male when you did yours did you join these two together?rgds don
 
Last edited:
yes done it, but now no pedal at all tried bleeding but not pushing enough through..left bleed nipple open for a few hours see if it would self bleed but no again ..Master cylinder??If so wheres the cheapest place to order one ?mate said there are two different ones for my year
 
You must log in or register to reply here.

Similar threads

Flossie
Lost me clutch, thoughts? Found the fault with a pic.
Replies
19
Views
2K
KISSMYAURA
KISSMYAURA
J
Gearbox noise
2
Replies
23
Views
3K
BIGrabbit100
B
Corne215
Clutch not releasing
Replies
11
Views
1K
marjon
marjon
Corne215
Clutch not releasing
Replies
0
Views
349
Corne215
Corne215
T
110 300tdi Clutch Judder at 1st gear
2
Replies
22
Views
792
Stanleysteamer
Stanleysteamer
Back
Top