Disco 1 300tdi clutch change - what else to replace?
- Thread starter fozt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Pilot bush and heavy duty clutch fork and I was doing it myself and could be bothered I'd do the rear oil seal whist I've got it apart
Thanks - but, what is a pilot bush?
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
It's like a metal donut jobber that goes between the clutch and the clutch fork, most kits come with one but not all do
ONE LIFE LIVE IT. D90
Active Member
- Posts
- 953
Not done the job myself.
But from what I've read, replacing the crank seal and spigot bush (crank bush) might be a good idea. Along with the slave cylinder while your there.
But from what I've read, replacing the crank seal and spigot bush (crank bush) might be a good idea. Along with the slave cylinder while your there.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
spigot bush 8556l fits in end of crank, heavy duty clutch fork as said ftc2957hd look at the fork pivot post the ball end can wear if it is ftc5218 is a new one
chrisstdt
Well-Known Member
- Posts
- 924
- Location
- scottish borders
Is it worth replacing the flywheel bolts (err4574 ?) as they come with that hard loctite when new
