300tdi aux belt

iwantone · May 4, 2016

I need a new belt as the new one I had decided to shred itself. I was just about to order one (98 Disco) and it said fitted non a/c versions. As far as I knew there were two sizes, early/late models 1580/1595mm. Am I missing something?

KNine · May 4, 2016

Maybe they mean it's not the belt for the air conditioning. Rimmer brothers tend to have a good selection.

Kwakerman · May 5, 2016

The difference in belt length is because two different size alternator pulleys have been used over the years (something like 50mm and 65mm diameter IIRC). You need to measure the pulley to confirm which is the correct belt. Air con is powered by a separate belt

Jonnyb1990 · May 7, 2016

It should have the belt leanght on your old one, go from there

Thomo1927 · May 8, 2016

Check all your pulleys are tight before fitting a new belt , Mine has shredded a few belts over the years and it's usually because a pulley is loose or worn.

Tomsoonn · May 8, 2016

I'm a little confused with your first line. You need a new belt cause you "NEW" belt decided to shred itself? Did you wanted to say "OLD"?

300tdi aux belt

iwantone

Active Member

KNine

Active Member

Kwakerman

Well-Known Member

Jonnyb1990

Well-Known Member

Thomo1927

Active Member

Tomsoonn

Member

Similar threads