- Posts
- 16,482
Whilst under the 110 noticed a threaded hole with nothing in it!
Is there supposed to be anything fitted in this space?
Is there supposed to be anything fitted in this space?
300Tdi....Am I missing something?
- Thread starter Saint.V8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,482
Cheers!
Yes it has a bit of a dribble...hence why I was having a bit of a gander....noticed this threaded hole with a sign of the leak around it...thought it might be something missing causing the leak...obviously it is intended to remain open unless wading...
Much Obligato!!
zeaphod
Well-Known Member
- Posts
- 3,110
- Location
- Belfast, Norn Iron
That is your timing case drain. If the oil is coming out of it, your front crank seal has gone and needs to be replaced soonish, before the oil gets onto the timing belt and damages the engine.
- Posts
- 16,482
Oooo....Will check ASAP.
Did the timing belt on the girlfriends 200Tdi last year....assume it is a similar process....wasn't esp. difficult!
Is the right answer
- mine looked a bit worse just after purchase, and it was the sump....... it was loose !!300 is easier as no need to disturb water pump etc.
- Posts
- 16,482
Super Brucey Bonus....!!
Will start to read up on the process.....bit of a geeky reader me!
Many thanks!
