rover p6
Member
- Posts
- 11
- Location
- Ip33 bury st edmunds
hi ive managed to purchase a 3.9 efi engine 35d0491 but i need a ecu, loom and air flow meter can any one help .cheers jase
3.9 efi
- Thread starter rover p6
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 21,222
- Location
- In the next Glen
Youve posted in the incorrect area there's a wanted section...........
Land Rovers Wanted | LandyZone - Land Rover Forum
rover p6
Member
- Posts
- 11
- Location
- Ip33 bury st edmunds
thats for wanted land rovers?Youve posted in the incorrect area there's a wanted section...........
Land Rovers Wanted | LandyZone - Land Rover Forum
rover p6
Member
- Posts
- 11
- Location
- Ip33 bury st edmunds
also i cant post thereYouve posted in the incorrect area there's a wanted section...........
Land Rovers Wanted | LandyZone - Land Rover Forum
- Posts
- 21,222
- Location
- In the next Glen
Nope parts too.
- Posts
- 21,222
- Location
- In the next Glen
discool
Well-Known Member
- Posts
- 13,497
So, appears u have a Range Rover engine, and was used with a manual gearbox.
EFI ECUs and AFM you will find possibly on eBay, the loom could be difficult as vehicle dismantlers don't want to spend the time it takes to remove correctly, there’s quite a bit of wire involved, but you may be lucky.
Hicap phill
Well-Known Member
- Posts
- 15,421
- Location
- Wiltshire
Would it not be cheaper to bang some carbs on it?
rover p6
Member
- Posts
- 11
- Location
- Ip33 bury st edmunds
3.9 engines are more common here? 3.9 engines are getting harder to find for a reasonable price and the problem of travel restrictions to go and look at other engines (covid). My thinking was that some of you may have scrap vehicles or donors that may have some of the parts that i need?
