3.2mm 1/8" FUEL LEAK OFF HOSE PIPE
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Endeleus
Active Member
- Posts
- 441
- Location
- Scotland / Russia
Yes and no.
I always get 2m as it's a bit tight to replace them all including the front one back to the FIP otherwise. I believe 3.2mm is correct though.
I always get 2m as it's a bit tight to replace them all including the front one back to the FIP otherwise. I believe 3.2mm is correct though.
Endeleus
Active Member
- Posts
- 441
- Location
- Scotland / Russia
ST3350 is the the oil filter which has the plastic top.
The older ones had alloy tops (ST2180), but think they were only on 94-95 models.
The older ones had alloy tops (ST2180), but think they were only on 94-95 models.
Dont get them (the leak off pipes) from this guy on ebay, there absolute crap, the braiding comes off almost immediately, and there just too soft to hold on to the nipple, they keep popping off all the time, maybe its because their made of neoprene?? who knows, who cares, there **** just get them some other place
Member ID ebiz96
http://www.ebay.co.uk/sch/ebiz96/m...._trksid=p3984.m1439.l2649&_trksid=p4340.l2562
Member ID ebiz96
http://www.ebay.co.uk/sch/ebiz96/m...._trksid=p3984.m1439.l2649&_trksid=p4340.l2562
lil4399
Active Member
- Posts
- 681
- Location
- Gueret France
I used 3mm silicon from ebay, 2m cost about £3
does the job good (so far)
had it on about 5 weeks so far.
does the job good (so far)
had it on about 5 weeks so far.
