200tdi rebuild

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yeah I was going to say; it's a very broad subject! You could have it rebored, or you could just de-glaze it and fit new rings, bearings and seals etc. Give us some idea man! (or woman).

-Pos
 
this is the first time for me in the forum,
well i am going to strip it down and rebuild it..i am thinking of galavanizing the chassis if its not to bad an fit a new bulkhead, respray etc etc...
i do work with spanners and helped a friend do it but its been a long time now and he is abroad , this is my first total rebuild:p
chassis seems in good condition except the rear x member but i cannot say anything before i strip the body off!!
willing to begin next summer so i was just trying to maybe have some pics or lists of what is needed for example to have beforehand to swap the bulkhead and so on..
i have already got several manuals i found online and haynes manuals etc collected over the years so any help will do to make it easier :rolleyes:

i have already seen busters zone and i would like to tank him for all the pics and also read all post of crowbird about the rebuild he has done on his 200

thanks guys
 
There isn't a list somewhere of what you wil need. You won't know what you need till you've taken it all to bits and had a look. Not to worry though as parts are very easy to get and pretty cheap too. There's also absolute ****loads of second hand stuf on ebay. Watch out for people selling off their old duff parts that they've just replaced with nice new ones there's some real rubbish about.
 
Back
Top