200tdi rebuild

Nice pipework!
Looking great. Well done

Nice work Albert, looking good.

After hours of sanding I've finally got the tub in primer. Just needs filler in a couple of places then it's ready for basecoat and laquer Tbh I quite like the colour when it's in etch. Might have to go for that on a future vehicle

nice, looks great

Got some filler on last night in one or two places. Been a long time since I last used filler so it looks a bit rough.


There's one or two slight marks which ive decided to leave be as it could make it look worse!

Got it sanded a reprimed a little. Due to slight ripples in the panel I had to settle for using the da and sanding it as flat as I could. Still not perfect but certainly a lot better!

Looking to get another coat of primer on tonite, get it flatted tomorrow night then it's all good for topcoating

nice "bog" work there

Finally got the tub painted and laquered. Made a bit of a mess of the laquer so I'll have to do some polishing to get the runs out. Otherwise I'm happy with the e finish

Just ordering a few more bits and getting everything finished off underneath the rear third. All going well I'll have the tub fitted with stainless seatbelt and tub mountings

Proper cracking on now

looking smart
paint finish looks really good

Fitted new sender and got it all wired in tonite. Took forever but got there in the end


Next job it to get the handbrake cable fitted and source some tub mounting brackets. Once I've put oil in the transfer box and rear axle I can get the tub on I'll keep you updated as I go this weekend.

Albert

Everything bar the exhaust is now fitted at the back. Just needing brackets for the tub now. Also had it running off its own fuel supply for the first time since I took it off the road

Well I've spent most of the weekend fitting odd parts and generally tidying up underneath. Today I put the sound insulation on the bulkhead so hopefully it'll be a little quieter when driving


With any luck I'll get the brackets made for fitting the tub and have it on before Friday!

Albert

Got the rear mounting brackets made at work tonite so I finally have the tub on the chassis

I think I might need some steps for it

looks a beast, love it

Not been on for a while. Been mainly tearing my hair out with the wiring but that getting there now. I'll get a load of pics up when I've got my tablet linked to my properly. It now starts off the key, the battery box is in and it actually has some working lights.

Feel sorry for the previous owner of the accident damaged bulkhead. Got power to it and it's only reading 37k!!!

Fingers crossed I'll have wings etc on before xmas

That's nice milage and a shame the landy in which it came from had such a short life

Looks cracking. Great colour too.

Great job mate. Looking really good.

Hi all,

Been busy on the 90 getting it finished off. Still got a way to go mind. I've got a few photos to add and I'll have an uploading session some point in the next week or so. Anyway here's a photo of how it stands at the minute to keep you happy



Albert