darius
Active Member
- Posts
- 254
- Location
- Kidderminster
I want to swap my 200Tdi Defender 90 rear axle from drums to a disc axle, can i use a Salisbury or Disco item and is this a straight swap? All help gratefully received 
200Tdi rear axle
- Thread starter darius
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
disco axle is a straight swap, and one which i would strongly recommend.
From what i have heard the salisbury needs a different prop (apparently a RR or disco front one is correct) and new spring cups, but otherwise goes on fine.
From what i have heard the salisbury needs a different prop (apparently a RR or disco front one is correct) and new spring cups, but otherwise goes on fine.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
rrc goes straight on aswell
darius
Active Member
- Posts
- 254
- Location
- Kidderminster
Excellent. Thanks both. I will go for a disco/ RRC item then and forget the salisbury.
Many thanks
Many thanks
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
IF you find that your axle has a 3 bolt flange on the input to it, fret not cos they are actually quite easy to change an alll.
fashion a puller out of some nuts, a bolt and some spanners and a socket, pull the nose out the middle, un bolt the flange.
Get a 24 spline input flange, AND THE SPACER TO GO BEHIND IT and bolt it on! You will probably find that your old axle has only a 4 spline input on it.
fashion a puller out of some nuts, a bolt and some spanners and a socket, pull the nose out the middle, un bolt the flange.
Get a 24 spline input flange, AND THE SPACER TO GO BEHIND IT and bolt it on! You will probably find that your old axle has only a 4 spline input on it.
