Hi Guys
I have a discovery 200 TDI mark 1
I had a whining front diff 24 spline job, so sent it away for new set of bearings, got it back put it all back together, didnt even get to the end of my road, very loud grinding noise.
Whipped the front prop off, jacked the old bus up and spun the wheel by hand the flange is moving in and out, but there is no movement when you try to wiggle it by hand.
Took the flange off, seal destroyed and flange has been rubbing on the diff housing,
But the taper bearings are seated ok from what I can see, and the spacer was in the right place.
Any Ideas because Im stumped http://www.landyzone.co.uk/lz/images/smilies/confused.gif
I have a discovery 200 TDI mark 1
I had a whining front diff 24 spline job, so sent it away for new set of bearings, got it back put it all back together, didnt even get to the end of my road, very loud grinding noise.
Whipped the front prop off, jacked the old bus up and spun the wheel by hand the flange is moving in and out, but there is no movement when you try to wiggle it by hand.
Took the flange off, seal destroyed and flange has been rubbing on the diff housing,
But the taper bearings are seated ok from what I can see, and the spacer was in the right place.
Any Ideas because Im stumped http://www.landyzone.co.uk/lz/images/smilies/confused.gif