L322 2005 TD6 not starting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Finally got the pump out and set myself up in the garden for a fun afternoon :D

Fuel pump 2.jpg


Didn't want to lose the O rings

Fuel pump 3.jpg


Think I found the problem, shame that's the O ring that ain't arrived yet :rolleyes:

Fuel pump 1.jpg



Thought I'd give this a clean as well

4.jpg


Done as much I can till the other O ring arrives.

5.jpg
 

Attachments

  • Fuel pump 2.jpg
    Fuel pump 2.jpg
    173.9 KB · Views: 100
Knowing it would be a PITA to get the bottom nut on the HP fuel pump I thought I'd try and make it a bit easier so I 3D printed this

HP Fuel gizmo 2.JPG


Had to cut a bit off the 22mm pipe cos a bit of the engine got in the way but I think it made it a lot easier.

HP Fuel gizmo.jpg


HP Fuel gizmo 1.jpg


Also did the crank case breather upgrade

CC breather.jpg


CC breather 1.jpg


And changed the air filter (after I took the picture) :)
 
  • Like
Reactions: kds
O ring arrived at lunch time and 30 minutes later she's running again :D

Now all I have to do is put everything back together and fill her up with water and antifreeze.
 
Back
Top