Hello,i am new here.I was reading many reports about L322 Gearbox failure . Not find the right answer. Anyway ,bought this car with the fault ,not running at all in gear! Just a challenge,as price was good to me . Changed gearl oil and filter and got it driving in gear 2 on D and manual gear 2 .select R and no reverse at all ,no noises,nothing. Noticed that i have in neutral a slight forward move . When i switch in low range,it makes a mechanical hammering noise,when engine is running. If i switch to low range only ignition on ,then nothing to hear . Phoned up a gearbox company ,they told me when clutch 4 is burned,it will not select Reverse,rebuilt£2300 . Is there anything else what i can check? That would be helpfull before i pay for a rebuilt. Many thanks to all of you .
2005 Range Rover L322 td 6 bmw drives forward in neutral,no reverse
- Thread starter dirk111
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grebby
Active Member
- Posts
- 298
- Location
- Sutton Coldfield
DO NOT POST QUESTIONS..Please read before posting
This section is for member to post pictures of there vehicle restorations, rebuilds etc. Please start you're own thread if you want to post photos of yours. Build threads, ongoing modifications and vehicle use are welcome. Specific questions threads belong in other sections. For sale threads...
www.landyzone.co.uk
Post in the range rover section, you might get a better response there. This section is for vehicle builds/projects.
Grebby
Active Member
- Posts
- 298
- Location
- Sutton Coldfield
I'm not but I've reported it so they can move it.
Datatek
Well-Known Member
- Posts
- 45,023
- Location
- Near Poitiers SW France
The GM box in the L322 rarely lasts more than about 80K miles so you most likely need a rebuild or replacement box.
I guess from your name you might be Dutch?
Bemble
Well-Known Member
- Posts
- 653
- Location
- Lancashire
Unless it’s as simple as the selector cable adjustment being out, driving in Neutral is a pretty sure sign that one of your clutch packs is welded solid. Not that unusual with the GM 5L40-E transmission in the L322, I’m afraid.
Phil
Phil
