2003 td6 brake pipe layout

Hi all, the first time ever in my driving history I had an advisory on my MOT this morning for corroded brake pipes. The problem is I cannot find any drawing of the pipework so that I can work out what fittings and other joints I need to order prior to stripping it all down. I would be grateful for any help you Gents can give me. Thanks.

The brake system on the L322 is not straight forward and replacing the brake pipes is not easy.
Get underneath and look for the pipes.
Download RAVE which should give you details including how to bleed the system.

Also, look on the www for an online Land Rover MicroCAT - I use lrparts.ru (click the 'In English' link at the top of the site) as this will give you exploded parts diagrams......eg:

Thank you Gents, I now have something to work with.

acc said:

Thank you Gents, I now have something to work with.

Click to expand...

As I said in your other thread is this a deliberate thing?

Sorry all, but the Gents reference was purely because only the male members of the Forum answered my question. Sorry for any offence taken.

acc said:

Sorry all, but the Gents reference was purely because only the male members of the Forum answered my question. Sorry for any offence taken.

Click to expand...

Only the male members answered because in your original thread at 1135hrs , yesterday, you only asked for their help. You did the same in this thread.
You could have had your answer, from me, yesterday, at 1206hrs.
However, all done now . Onwards and upwards

Hi Guys, Just an update on the pipework. I have found that Rimmer Bros sell all the copper pipes ready made, So I have ordered all the pipes LH & RH, flexi hoses and clips from them.

Rimmers they no how to charge for parts normally, think of a number and triple it then add half again