OK, so I ordered a blanking plate off the iternet and it duly arrived today.
Seeign as it was such a fine evening and as I'd spent the past few days reading up on the not too hard task of fitting it I popped the bonnet and removed the engine cover...and stared. Someting was not quite right.
After a few seconds it dawned on my. The expansion box (seen in the pics on this thread: http://www.landyzone.co.uk/lz/f68/fitting-egr-blanking-plate-td5-without-removing-egr-171377.html) was missing.
What I have is a corrugated pipe that runs from next to the turbo, all around the front (in one piece) and around to the manifold.
At no pint is there anywhere that can be reached to easily fit the plate.
Am I missing something here or are the 2001 models (and earlier) setup differntly?
Seeign as it was such a fine evening and as I'd spent the past few days reading up on the not too hard task of fitting it I popped the bonnet and removed the engine cover...and stared. Someting was not quite right.
After a few seconds it dawned on my. The expansion box (seen in the pics on this thread: http://www.landyzone.co.uk/lz/f68/fitting-egr-blanking-plate-td5-without-removing-egr-171377.html) was missing.
What I have is a corrugated pipe that runs from next to the turbo, all around the front (in one piece) and around to the manifold.
At no pint is there anywhere that can be reached to easily fit the plate.
Am I missing something here or are the 2001 models (and earlier) setup differntly?