2000 Model Year P38 ABS Fault...

oakey

Well-Known Member

Full Member

Posts

2,101

Location

Mull of Kintyre

• Mar 3, 2019

• #21

If you been steam cleaning under the engine and gearbox you may have disturbed a wire down there somewhere.
Ages ago when I had starte motor problems with the wee wire disconnecting, somehow I disturbed something that brought ABS lights on.
No idea what it was cos I footered a bit more and it went off again

 

dubbleRR

Well-Known Member

Posts

1,029

Location

highlands of Scotland

• Mar 4, 2019

• #22

Hi Doo, Did you have problems with the cruse control ,and abs warnings.Could {and i say could be-four i get slapped on the back o the head } be a faulty brake light switch,,,

 

D

Doo

Well-Known Member

Posts

3,771

Location

away

• Mar 4, 2019

• #23

dubbleRR said:

Hi Doo, Did you have problems with the cruse control ,and abs warnings.Could {and i say could be-four i get slapped on the back o the head } be a faulty brake light switch,,,

Click to expand...

No, I did the test and my Accumulator is shot. 54 seconds to build pressure and one press of the brake pedal set the pump running again...

Morag from D&M Spares has ordered a new one & it "should" be in tomorrow

https://www.dandmlrspares.com/