200 tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wiltshire landyman

wiltshire landyman

I’m back
Posts
15,062
Location
salisbury plain wiltshire
been offerd a range rover classic c reg that failed the mot on chassis problems.£250 bodywork very tidy and it has a 200 tdi engine in it which is well sweet as i have driven it..
question is did the rangie come with a 200 tdi from the factory or has it been transplanted.is it likely to be a disco tdi.

will all the pipework to the rad fit in my 90 or will i have to replace all that
seriously thinking about buying it and storing it untill i can afford the transplant or am i chasing a no goer here?
 
dont know about the axle. but its likely to be the same. RRC, disco 1 and defenders all share alot of parts. I would thoroughly check the engine and if its a minter, go for it :D take the engine and axle, sell the alloys and other bits on ebay and scrap it. you WILL make your 250 back but it WILL cost you alot of your time. dont be tempted to scrap the RRC before yours is up and running and been checked. you will need all the engine ancil. along with fuel gauge senders etc.

G
 
As far as i know they will go straight on.

As the person who advised me when i bought my disco, whats it worth to YOU... If you look round it, and think... Do I really need to bother wise this currently? Then its probably not worth it.

But... If you have a good use for it, and the space to do it/keep it etc, then yeah its worth it.
 
Griffdowg said:
dont know about the axle. but its likely to be the same. RRC, disco 1 and defenders all share alot of parts. I would thoroughly check the engine and if its a minter, go for it :D take the engine and axle, sell the alloys and other bits on ebay and scrap it. you WILL make your 250 back but it WILL cost you alot of your time. dont be tempted to scrap the RRC before yours is up and running and been checked. you will need all the engine ancil. along with fuel gauge senders etc.

G
Click to expand...


Why the fuel gauge senders?
 
dont really have the space but could bend someones arm to store it..but its like everything it will be sods law if i buy it my 2.5 td will go on forever,but if it went bang i wouldnt be able to find a tdi.
the only thing that puts me off is the amount or work to get the engine out and into mine,,whereas if i buy an engine already out then thats half the job already.mmmmm what to do
 
It takes less than a day to remove an engine. If you had all the bits and tools to hand, you could do the entire conversion in 2-3 days. Mine took about 5 of solid work, cos i had to keep going in outta the rain, and going off to get bits and bobs.

To give you a rough idea... It is easy to take an engine completely out, change the clutch and get it back in in 4 hours, in an average driveway, with average home mech tools.

Its all good fun!

Pre-removed engines are more expensive though, from what I have gathered.
 
You must log in or register to reply here.

Similar threads

W
1990 defender 19j.
Replies
0
Views
235
winmag300
W
WoodyO
For Sale Discovery 200 tdi - manifolds and turbo
Replies
0
Views
144
WoodyO
WoodyO
R
Air box 200 and 300 tdi
Replies
10
Views
3K
RustyDefender
RustyDefender
WoodyO
200 tdi camshaft wear
Replies
10
Views
1K
WoodyO
WoodyO
jimllshiftit
Whats the right approach for painting Galv?
Replies
11
Views
660
dag019
dag019
Back
Top