20" rims on Landies???

For project Launch Rover to get my boat in the water I have blagged a set of tyres off a Manitou, but they require the above size rims. Used to own a 101 but can't remember if the rims on those were any larger than normal. Can you get 20" rims to fit Landie hubs, I'm not too worried about the tyres hitting the bodywork as I don't intend to have much.

Cheers

John Neal wrote:
> For project Launch Rover to get my boat in the water I have blagged a
> set of tyres off a Manitou, but they require the above size rims. Used
> to own a 101 but can't remember if the rims on those were any larger
> than normal.

101s are on 16" rims, but they will take Unimog 20" ones too.

Steve

On or around Fri, 07 Oct 2005 17:28:42 +0100, Steve Taylor
<[email protected]> enlightened us thusly:

>John Neal wrote:
>> For project Launch Rover to get my boat in the water I have blagged a
>> set of tyres off a Manitou, but they require the above size rims. Used
>> to own a 101 but can't remember if the rims on those were any larger
>> than normal.
>
>101s are on 16" rims, but they will take Unimog 20" ones too.
>

won't fit standard landies, though, wrong stud pattern.
--
Austin Shackles. www.ddol-las.net my opinions are just that
In Touch: Get in touch with yourself by touching yourself.
If somebody is watching, stop touching yourself.
from the Little Book of Complete B***ocks by Alistair Beaton.

Can anyone tell me what the PCD is for a 101 6 stud

Rich

--
To reply remove " spam "
"Austin Shackles" <[email protected]> wrote in message
news:[email protected]...
> On or around Fri, 07 Oct 2005 17:28:42 +0100, Steve Taylor
> <[email protected]> enlightened us thusly:
>
> >John Neal wrote:
> >> For project Launch Rover to get my boat in the water I have blagged a
> >> set of tyres off a Manitou, but they require the above size rims. Used
> >> to own a 101 but can't remember if the rims on those were any larger
> >> than normal.
> >
> >101s are on 16" rims, but they will take Unimog 20" ones too.
> >
>
> won't fit standard landies, though, wrong stud pattern.
> --
> Austin Shackles. www.ddol-las.net my opinions are just that
> In Touch: Get in touch with yourself by touching yourself.
> If somebody is watching, stop touching yourself.
> from the Little Book of Complete B***ocks by Alistair Beaton.

"John Neal" <[email protected]> wrote in message
news:[email protected]...
For project Launch Rover to get my boat in the water I have blagged a set of
tyres off a Manitou, but they require the above size rims. Used to own a
101 but can't remember if the rims on those were any larger than normal.
Can you get 20" rims to fit Landie hubs, I'm not too worried about the tyres
hitting the bodywork as I don't intend to have much.

Cheers

These tyres are very wide and very heavy. They need very wide and heavy rims
to mount on.
They are just not suitable for a LR IMHO.

Huw