Disco 2 2 ins lift

Hello friends I could do with some help, I now have a 51 rerg D2, it has springs and shockers , so the question is , if I give by D2 a 2ins lift do I need to change all the springs and shockers or just install a 2ins block on each corner...???? .... many thanks

kaydl said:

Hello friends I could do with some help, I now have a 51 rerg D2, it has springs and shockers , so the question is , if I give by D2 a 2ins lift do I need to change all the springs and shockers or just install a 2ins block on each corner...???? .... many thanks

Click to expand...

You won't improve suspension articulation with spring spacers, if you want a lift then fit a lift kit with springs, shocks, extended brake lines and rear dislocation cones that will re-seat the springs.

Lift blocks are a useful device for a 40mm lift on the air suspension of the D2, and because the SLS could lift with the use of a switch on the dashboard the flexible rear brake pipes are long enough to accommodate it.
But we're not talking about a D2 with SLS but steel coiled springs.
Take a look at this thread for some of the answers to questions which you might have:-

https://www.landyzone.co.uk/land-rover/lifting-a-d2-properly.300573/#post-3749057