2.5n/a flywheel housing

Hi.I am currently in the middle of a series 3 project,and need a 90 2.5n/a or turbo engine flywheel housing.
Cheers lbuddy36.

how urgently, and would you spare a beer tokin or 2 4 it?

A mate has one, but hes a bit tight fisted.

Also, it would help a touch if you said where you were/where you are willing to come pick it up from

Why, it is very little different. Anything that fits one, should fit the other. You may need to leave the odd bolt out or grind off a dowel, but nothing drastic

I need to fit onto a 300tdi engine,to convert it to fit a series gearbox.I could also use a 200tdi housing as well.

me mate says his NA flywheel housing is available if you want it.

Hi there how much does he want for it, and where are you.My location is just outside brecon south wales.

Are you sure you need it? The reason I ask is because I have a 300tdi using it's bellhousing coupled to a LT77, the LT77 was originally coupled to the 2.5NA bellhousing.

So working back, if an 2.5NA housing fits your gearbox (which also fits a 77) and the 300tdi housing also fits a 77 then the 300tdi one should fit your gearbox too (bar a stud or two)

ihi i have the same sort of problem mine is a 200tdi box and im trying to find out if a 300tdi with the 200tdi flywheel cover on will mate up with the lt77 box paul

This might help Landrover 110 engine page

lbuddy36 said:

Hi there how much does he want for it, and where are you.My location is just outside brecon south wales.

Click to expand...

not much. Im in bangor, n wales, the housing is on its engine nr. llangollen.

little6872 said:

ihi i have the same sort of problem mine is a 200tdi box and im trying to find out if a 300tdi with the 200tdi flywheel cover on will mate up with the lt77 box paul

Click to expand...

READ

I have a 300tdi coupled to my LT77 with the 300 housing.

so do i but i used the NA housing.

My mate has jus fitted his to his LT77 with his 300 fwheel housing.

Does anyone know for a 2.5 flywheel housing around the south wales area.Need urgent to carry out project.
Cheers lbuddy36