2.5 NA cylinder head sensors

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

nortm005

Member
Posts
27
Location
Oxford
Hi,
Can anyone help identifying the sensors on the top of the cylinder head?
I understand the one on the left is a water temp sensor, but all diagrams i have seen show the other as a blanking plug.

2.5 NA 1986

Many thanks
IMG_2856.jpg
 
I have no idea, but can say on the disco 200, def 200 and the early 2 litre derv, that back hole is used for the heater matrix.
 
Both are water temp sensors. I currently have 2 in mine but I only connect wiring to one. Was cheaper and easier to fit the old one than buying a blanking plug at the time.
 
Back
Top