Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
1996 110 build coming along. Rain stops play
- Thread starter Allnewtome
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
doriz
Well-Known Member
- Posts
- 17,312
Good Lord 
some nice welding there.
some nice welding there.
Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
Thank you.
I do have a small question for the ladies and gents here.
I have today started to weld the new rear chassis in place.
I'm a coach builder by trade. So I know I have sleeved the chassis correctly, and welded to an iso standard.
However, my questions is " would a future owner prefer to see the Weld through the paint etc or a
Smooth surface?
I know my farm mates prefer to see the weld.
But with the lipstick lads and future buyers im unsure..
I do have a small question for the ladies and gents here.
I have today started to weld the new rear chassis in place.
I'm a coach builder by trade. So I know I have sleeved the chassis correctly, and welded to an iso standard.
However, my questions is " would a future owner prefer to see the Weld through the paint etc or a
Smooth surface?
I know my farm mates prefer to see the weld.
But with the lipstick lads and future buyers im unsure..
Attachments
Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
Small update.
Work is progressing in sunny weather.
New clutch. Rock sliders. Rear wiring, brake lines etc.
New rear floor next, small amount of welding on the bulk hesd. And then time for the fancy stuff.
Work is progressing in sunny weather.
New clutch. Rock sliders. Rear wiring, brake lines etc.
New rear floor next, small amount of welding on the bulk hesd. And then time for the fancy stuff.
Attachments
Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
Cappings finally repaired.!
Rear door stripped ready for panoramic glass.
All prepared ready for some acid etch.
This afternoon.
Ill leave the full respray to a pro. But good for protection until that time.
Updated with a few more pics.
Rear door stripped ready for panoramic glass.
All prepared ready for some acid etch.
This afternoon.
Ill leave the full respray to a pro. But good for protection until that time.
Updated with a few more pics.
Attachments
Last edited:
Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
Small update. !!.
Slow progress of late !!
Latest pics.. door frames to be blasted and repaired hopefully I can this weekend.. new skins to be fitted..
Panoramic glass due for Christmas.
Then it's the final finish before paint.
Slow progress of late !!
Latest pics.. door frames to be blasted and repaired hopefully I can this weekend.. new skins to be fitted..
Panoramic glass due for Christmas.
Then it's the final finish before paint.
Attachments
Allnewtome
Member
- Posts
- 22
- Location
- Gloucester
Another update.
And a question on the front door height.
The new door skin hardly folds over the frame on the front door. (Bottom only).
Im at around 45.5 inches or 1155 mm top to bottom on the skin.. ( measured from the inside at the longest point) can anyone confirm this dimension please? Thank you
And a question on the front door height.
The new door skin hardly folds over the frame on the front door. (Bottom only).
Im at around 45.5 inches or 1155 mm top to bottom on the skin.. ( measured from the inside at the longest point) can anyone confirm this dimension please? Thank you
Attachments
Similar threads
