1994 Classic "Softdash" Audio Wiring (incl rear sub woofer)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RS2000CUSTOM

Active Member
I must apologise for my first post being a question !

BUT

If you want the right answers you got to ask it on the right forum ;)

Here goes - after searching this forum for possible answers I couldnt find the info I need

My Vogue SE with factory fit Clarion PU-8944A head unit has finally gone kaput

Whilst the sound was superb and there are repairers on T'interweb I want to join the Ipod age !
I already have a new head unit with CD changer and AUX input that I wish to fit

My main issue is with the rear speakers and sub woofer

I wish to retain the sub and need to know how to wire the sub using the standard ISO wiring of the new head unit and how will this effect the roof speakers as they appear to be wired through the standard sub amplifier

Any ideas or what have any of you lot done before

Thanx for any replies

cheeRS

Dave

p.s. Yes I also have a Ford Escort MKII RS2000 Custom :D
 
Reet, just done this on mine. I haven't figured out how to wire in sub yet either, just hooked up to standard 6 speakers for the time. Need to change the connectors to ISO A and B connectors to hook up, RAVE disk download for the wiring colours, and Mad Hat Mans thread (In FAQ section) about ISO wiring colours for the permanent live and switched live feeds is what I used.
 
The sub in the Classic is a bit strange as it expects to have a speaker strength signal and then this signal is amplified again by the amp attached to the the top of the sub. A line signal is not strong enough to drive the sub, it needs more. I am also trying to work out the best way to wire it in, probably need to add a small mono amp to boost the line signal you could then easily attach a volume control to have seperate control of the volume of the sub. My poor dog often sits in the back and I dont want to shake up his internal organs with hugh doses of bass.

Regards

Rishi
 
The sub in the Classic is a bit strange as it expects to have a speaker strength signal and then this signal is amplified again by the amp attached to the the top of the sub. A line signal is not strong enough to drive the sub, it needs more.

At last !!

Somebody else has the result I had when attaching a line-out to the sub feed wire

Everyone else kept saying

"Simply connect a line-out feed to it"

That wont work I told em but they insisted it would work
 
I've registered with your site, but I'm yet to get the e-mither so it all appears to be blank, g'dammit..

Your account is now active

And yes you will probarbly want another - lol

Here is a fave pic of mine on track @ Croft in Sept 2007 !

croft.jpg
 
SKC - that's a Liverpool plate. Probably sold new by J.Blake & Co...

I'd love another Mk2, but it's just impossible right now..
 
Back
Top