AJofShabby
Member
- Posts
- 78
- Location
- UK
Good afternoon all. I have had probs with the brakes on my 90 for a while. The master cylinder was replaced recently, the servo passes the usual tests, the garage that fitted the MC have bled the brakes again and there are new pads on the rear. It has a Disco 1 front axle/discs. Essentially the pedal travels about halfway before it has any bite. It is useable for short journeys but I went out yesterday for 5 hours and at the end of the trip the brake pedal can travel to the bulkhead before it bites. There is no obvious leakage I can find. Does anyone have any idea what the problem could be, pls?
Thanks.
Thanks.