1984 RRC fuel pipe

Hi folks, anyone know what size of pipe runs down the drivers side of chassis. Had a slip with a grinder. Think its a fuel return line, seems awfully small for supply line. Or can anyone recommend how to join or inside diameter and ill order a brass push fit with barbs. Defo fuel as I got covered in it

Measure it.

hi all, ok so after the help above, i get between 4.5 and 5mm on the pipes. They are badly damaged so i cant get an accurate measurement. Can anyone help with either the part number for the correct pipe or advice for replacing. What fitiings and pipe size i need. Not done before. Thanks

4 or 5 mm copper from a plumber merchants, worked for me.

Thats great cheers. What about the ends? Are they a nut and olive? If so, don't suppose you have the sizes :-(

Thanks appreciate the help.

Solder some olives on to help the flexi pipes stay in place

Great thanks for the tip.

Assuming it is carburetor, flexi fuel hose will do instead

Hi cooltide. Thanks, I'm still struggling for pipe size. 4mm id, 4.5mm or 5mm to be able to use original fittings. Haven't got them off and snow here. Any help would be great. Yea it's carbs and it's the leak off line.

This and some crimps will sort you. 1M Cotton Over Braided Rubber Petrol Fuel Line Diesel Oil Tubing Hose Pipe Tube | eBay

Cheers.

Last time I bought some was from silicone_hose_world on eBay. Fast and quality.

You need to measure, mine was for holley to BMW tank so can't help with id

cooltide said:

Last time I bought some was from silicone_hose_world on eBay. Fast and quality.

You need to measure, mine was for holley to BMW tank so can't help with id

Click to expand...

DO NOT use Silicone tubing for fuel.

wammers said:

DO NOT use Silicone tubing for fuel.

Click to expand...

Good point.
That's just the ebay username, company website is advancedfluidsolutions.co.uk.

cooltide said:

Good point.
That's just the ebay username, company website is advancedfluidsolutions.co.uk.

Click to expand...

Ok, Silicone not good with fuel specially since unleaded petrol and low sulphur derv came into being. To many chemicals in fuel now the chemicals don't like Silicon rubber.