1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

1984 RRC drive flange

Discussion in 'Range Rover' started by Cristoforo, Dec 29, 2021.

< Previous Thread | Next Thread >
  1. Cristoforo

    Cristoforo Member

    Apr 3, 2017
    Likes Received:
    Hi all can you get drive flanges for a 1984 Range rover classic lots seem to be listed for newer after 1986 ones but can't seem to find any for before 1984, anyone with a part no ? Or am I missing something like they are supposed to be one piece half shaft and flanges Thanks all
    Last edited: Dec 29, 2021
  2. Ratae

    Ratae Well-Known Member

    Dec 16, 2008
    Likes Received:
    Drive flanges for the transfer box output shaft flanges or the axle diff input shafts?

    Which transfer box do you have?
    If it's the LT230 transfer box output shaft flanges you need to look to see what you currently have fitted as there are more than one type & they aren't interchangeable.
    You will find you'll either have a multi-splined one or a 4 splined one.
    Mine's an '86 reg & has the 4 splined ones on the transfer box.
    But bear in mine these are big boys meccano kits.
    Just disconnect the prop, remove the big centre nut & look.

    Don't bother with cheapie pattern seals for these either. They don't work for long.
    tomcat59alan likes this.
< Previous Thread | Next Thread >