1954. 107 inch rebuild

any one want a 107 ? im comming to the end of a project on my 107. ive taken it further than i was intending, i now need the space and the money for other more important projects.

the 107 has its origional reg and V5, the vehicle is all origional with very little in the way of modifications, the engine is the origional engine but is siezed .
the following link is to the rebuild as it has been done.
once the front axle has been renovated and new springs fitted im going to be looking at getting it sold. so if any one is thinking of a nice project 107 this might be the one for you.

1954 series 1 - 107 inch | Facebook

hi
Nice 107 , is she running? can you show some pics ?

not running engine is siezed, wont know to what extent untill i get the sump off

pics ? hmm let me see, if ya on facebook heres the lionk to the rebuild.

1954 series 1 - 107 inch | Facebook

Didn't see the link before but i have to say it looks very clean!! good luck with it!

ive done about all i am going to do with it, once the front axle is rebuilt and fitted with new springs a few minor welding patches on the chassis its going on ebay

I;ll give ya 50p and two banana skins for it??

50p and two full orange peels and your on

vivnap said:

50p and two full orange peels and your on

Click to expand...

Ya drive a hard bargain £1 & a lime

now ya tring to rip me off.


3K and ill help ya load it

front axle bump stops had a bit of rot in em so they got cut off and i made new ones as near as perfect to the old ones, welded em on and got the axle casing sprayed black

pic that i couldnt post last night

vivnap said:

pic that i couldnt post last night

Click to expand...

Looks like a good job..Well done.

cheers

heres the link to most of the pictures ive taken

1954 series 1 - 107 inch | Facebook..

I'll trade you a Dewalt angle grinder for it

naa dewalt is black and decker crap ! once the front axle has been fitted its up for sale
more pics added to the album on facebook

Interesting I've never seen a 107.
I'm not an expert on these however I wouldnt have thought it'd go on eblag for 3000 coins, it'd need to be drive awayable for that kind of readies.
Nice shiny new balls, did you get all the bolts out and split the ends ok?, last time I tried to get an older one to bits I struggled for ages splitting the ends.

if it was drivable i would want a lot more than 3K for it ! ive seen some right tat 107,s sell for close to 2K and they aint a patch on this one. if it dont sell for 2800 to 3K then i will stick it under cover till such time i can get it fully done then it can go back on for 7K

as for the balls, one came off nice the other i had to cut the bolt head off but it split easily. i have never had any problems with splitting swivels ect.

its done and its comming up for sale so any one want a 1954 107 inch in good order but in need of renovation i know where there is a nice one

and here she is ! up for sale and an exceptional amount of interest

land rover series 1 107 | eBay