13-04 pump failure 2 (pump not running when actuated) HELP

I have the 3 amigos on for about 6 months and drives me crazy. I purchased the Nanocom for the TD5 to try help isolate the fault tp correct.

-I have done the utilities (bleed, test front and rears) and all were fine

Deleted the 13-04 pump failure 2 (pump not running when actuated) fault and the 3 amigos disappear for a couple of drives then suddenly decide to become unwanted passengers again.

Any ideas on where to look now? All relays under the seat replaced, shuttle valve replaced, new brake fluid, all sensors removed and cleaned.....what do I do now besides black electrical tape over the lights?

Problem solved if anyone in the future has this issue.

Bleed the brakes!

Hi Bellaire,
Thank you for this information.
Could you please confirm if that solution lasted for long time or it was a temporary solution only?

Didn't the pump break fully then?

I have now the same error, since this morning, 3 amigos + handbrake lamp on the dash....


Btw, how long did you drive with error on dash? Is this critical? Or the car can be driven a while like this?