Honest Myles
New Member
- Posts
- 3
I have a Military 110 2.5 n/a FFR on a H reg, I was wondering if it was possible to fit power steering to it. It’s a great vehicle but is very heavy and nightmare driving in town.
110 Military 2.5 n/a, can I have fit power steering fitted?
- Thread starter Honest Myles
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I have a Military 110 2.5 n/a FFR on a H reg, I was wondering if it was possible to fit power steering to it. It’s a great vehicle but is very heavy and nightmare driving in town.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Yes it is possible You'll need a double pulley if you haven't already got one fitted. To power the PAS Pump.
Honest Myles
New Member
- Posts
- 3
Would you a ball park figure as to the total cost at a garage to have it done.
discomania
Well-Known Member
- Posts
- 6,947
Yes it can be done, CharlesY had all the bits for mine when I bought it but I figured, less bits, less pipes, less to go wrong.
If you don't dry steer the manual steering box should be fine, but I guess it can get a little tight if your trying to park in town.
If you don't dry steer the manual steering box should be fine, but I guess it can get a little tight if your trying to park in town.
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
I was glad to be rid of PAS on my 110, never got the git to stop leaking.
discomania
Well-Known Member
- Posts
- 6,947
There you go Honest Myles, Boydy will do you a steering box swap.
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
Lol nah i got rid of the power steering when I got rid of the truck - I bought a manual steered 90 instead. Ill agree, the steering can get heavy while manouvering, but as soon as you creep forward which you should do anyway of course, its not a problem. Hasn't bothered me yet in 18 months
Honest Myles
New Member
- Posts
- 3
I'm in Bath Somerset, anyone know anybody local to me who would be up for doing the work? How much do you reckon it would cost?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
If you bought all the bits from a breakers I'd say £100 quid tops. And you could do the work yourself it's not a difficult job to do at all.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
eightinavee is in your neck of the woods - might be worth a pm to him.
