bodgit0_0
New Member
- Posts
- 302
- Location
- Tidworth Or Stourport-On-Severn
I am planning on fitting an LT77 to the arse end of my 2.0 Perkins Prima TD then throw the hole lot into my coiled 80. I already have the bellhousing and aquired a so called good Disco box with t-box.
Pulled my Disco box apart today and found the output shaft and t-box input are stuffed. Priced up the bits and its gettign expensive, £150 to have the box stripped to fit the input I already have. Then theres the shaft @ £60 and the input for £50.
Basically I am on the scroung for an LT77 defender/110/90 with the short bellhousing to measure and compare my parts. Only need to borrow one unless it looks a goer then would be looking for a good one to buy.
Any offers, I can bring the bits to you to test distances etc.
Cheers
Lee
Pulled my Disco box apart today and found the output shaft and t-box input are stuffed. Priced up the bits and its gettign expensive, £150 to have the box stripped to fit the input I already have. Then theres the shaft @ £60 and the input for £50.
Basically I am on the scroung for an LT77 defender/110/90 with the short bellhousing to measure and compare my parts. Only need to borrow one unless it looks a goer then would be looking for a good one to buy.
Any offers, I can bring the bits to you to test distances etc.
Cheers
Lee