110 300tdi wiring

Hi guys,

Have never been in here before, what with owning a Disco and all.

My brother in law has bought a 110 that originally had a V8 in it but has been changed for a 300tdi. Whe he got it we knew the LT77 that was in it was goosed and were told it needed a bit of welding on the chassie to get through it MOT.

That was 4 month ago and we've had to do a complete strip down to replace 4 outriggers, bulkhead, weld chassis and replace rear body, sides and roof. Now he's gone and got a wiring loom for a 300tdi so I need to rip out the old loom and replace but don't have a diagram of what goes where. I tried google but can't seem to find one anywhere does anybody have a copy that they could send me.

Once I have the wiring done we can put everything back together but still need to find some doors that are in a useable state and don't deposit rust on the floor everytime you move them.

The engine wiring is very simple for a 300. You could make your own!! Two thick brown between alternator and starter. White to stop switch
Blue to temp sensor
Yellow to oil pressure
Red/White to starter piggy back
This is all you need I think will look later to confirm
Thick brown to starter
Thick red to glow plugs

Could use the v8 wiring aswell the one on the coil put on diesel stop switch

The wiring on the engine is ok, engine change was done by a garage for the previous owner.

It's the rest of the loom that he has got so I want to know what goes where. He's got all new lights that need conected and there's a few connectors that I can't work out what they are for.

Sorry can't help you there but a power prob will