'07' L322 needing front air bags

Paddy78 · Aug 10, 2023

Hi, I haven't been on here in a while, I have just gone back to having a range rover after being offered it at a price I couldn't refuse.

Anyway, I have a small leak in the front drivers side bag that is going to need replacing. Are there any recommendations on what bags and where to get them from? Also should I change the strut at the same time or only if it needs doing?

TIA

Datatek · Aug 10, 2023

Change both sides is all I can offer as advice.

1988smithy · Aug 10, 2023

Advanced factors for the bits

Paddy78 · Aug 11, 2023

Also, is there anything I need to do once I have replaced the bags. I'm doing bags and struts at the same time.

1988smithy · Aug 11, 2023

Scroll to the bottom, there's a link to download workshop manual if you don't already have it mate

Main Page - fullfatrr.com Wiki

www.fullfatrr.com

You might need to join the forum if you haven't already

Disclaimer, havent done this job myself

I don't think you need to recalibrate but don't take it as gospel. Think you need to pressurise the system before you put the weight of the car back on the new spring but again, I haven't done one. Workshop manuals well worth getting, can be a faff to navigate it on a phone but its got all the torque settings and diagrams.

I would be very gentle with the height sensors, try and pop them off and make sure the arm stays in about the same position, don't go twirling it round and banging it about, flapping in the breeze kind of caper

Paddy78 · Aug 11, 2023

1988smithy said:
Scroll to the bottom, there's a link to download workshop manual if you don't already have it mate

Main Page - fullfatrr.com Wiki

www.fullfatrr.com

You might need to join the forum if you haven't already

Disclaimer, havent done this job myself

I don't think you need to recalibrate but don't take it as gospel. Think you need to pressurise the system before you put the weight of the car back on the new spring but again, I haven't done one. Workshop manuals well worth getting, can be a faff to navigate it on a phone but its got all the torque settings and diagrams.

I would be very gentle with the height sensors, try and pop them off and make sure the arm stays in about the same position, don't go twirling it round and banging it about, flapping in the breeze kind of caper

Thank you

'07' L322 needing front air bags

Paddy78

Active Member

Datatek

Well-Known Member

1988smithy

Well-Known Member

Paddy78

Active Member

1988smithy

Well-Known Member

Main Page - fullfatrr.com Wiki

Paddy78

Active Member

Main Page - fullfatrr.com Wiki

Similar threads