gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
oil filter (leaking)
- Thread starter spyball
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yes i think your right ,and it is a v8 4.6, do i have to buy a new one then ?
good to know there is great guys on here
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
yes i think your right , do i have to buy a new one then ?
good to know a great guys on here
if it is leaking from the switch you could try nipping it up but normally it is better just to replace it with a new one.
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
its an easy job just a bit awkward,when you fit the new one dont go mad when you tighten it up.
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
will do
what a hot night
sure is,i would rather be hot than cold,i feckin hate being cold.
lol, i quite agree
also my front axl is leaking at the bottom where the seal is , to save taking apart and resaeling , is there a easyer way to do
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
yes,go to hafrauds or similar and ask for an oil seal additive,you put this in the axle/gearbox or engine and if the seal is not to knackered it makes the seal, seal again.just make sure you get the right one for the item you want to fix.ie axle or engine or g.box.ok.
gemsdad
NOT BOTHERED.
- Posts
- 67,824
- Location
- halfway between here and there.
no problem,just ask for help,someone will always try to help you if they can.cheers.
