What do you think?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
distd5co

distd5co

New Member
Posts
311
Location
Peterborough
Any thoughts? I would like to know what you think. No doubt people will s##g it off because its a disco 2 but boohoo I like it hopfully you will??? And heres what i Have done to it so far if you would let me know what you think i would appreciate it. Here goes winch bumper, 2" front lift springs, 2" lift shocks all round, braided brake lines all round, bfg at 265/75/16 (changing to mud terrains in same size) The rear has to inch lift ont the air bags i can also still raise the rear a further 2" by pressing the offroad mode button so in total the rear lifts to 4" for steep hills n stuff, k&n filter, my own custom made difflock linkage enables me to use TC and difflock together. I am currently making a half cage for the front witch incoporates a snokel and light bar. Also rock sliders. Things i will be fitting soon are front and rear ARB air lockers, tds goldfish 12,000 winch, devon 4x4 rear bumper, steering guard, rear tank guard thats about it so what do you think????? VIDS AND PICS....

http://
03052008282.jpg


http://

http://

http://

http://

http://
 
Carry on, we like piccies :)
watch the mods though, sometimes you can do a bit too much ;)
Look for Treweys thread about 2" lifts and the additional work that occurs as a result of it......:eek:
 
im just uploading vids on to u tube then i will post. got double carden front prop have read that thread though very interesting. i wana know if i can fit a 200 tdi prop n diff flange from a disco get rid of the dohnut looks abit suspect with the lift. any sugestions? Dan
 
distd5co said:
im just uploading vids on to u tube then i will post. got double carden front prop have read that thread though very interesting. i wana know if i can fit a 200 tdi prop n diff flange from a disco get rid of the dohnut looks abit suspect with the lift. any sugestions? Dan
Click to expand...

Carry a spare and don't buy cheap donuts, ask Dorset Vogue SE - he knows all about cheap donuts.
Not sure if the old Disco stuff is compatible, even if you change the flange.
Have you checked to see if the flange on the rear of the transfer box is the same?
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
984
MAF Diver
MAF Diver
Sieklo
Disco 2 D2 TD5 Auto high fuel consumption
Replies
8
Views
387
sierrafery
sierrafery
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
S
Suspension Nightmare Unsolved!
Replies
4
Views
962
sierrafery
sierrafery
ChrisBduck
3.6L Land rover 90
Replies
2
Views
609
ChrisBduck
ChrisBduck
Back
Top