It looks like thats my only option, any idea on the ride heights?
Hi,Hi, I am having problems using the software, I am using a serial to usb converter cable, I have checked it is wired correct and tried linking the two relevant pins in the OBD connector to validate that it is sending and receiving ok. Yet no matter how much I try I cannot get it to sync communicate with the EAS unit, all I get is tx fine and rx will come up with 1 to 10 with any thing from zero´s to random numbers with a letter back. I have tried cleaning and checking the socket under the dash, changing baud rates, different com ports, with FIFO buffer and without, altering delay speeds all to no avail..................I am about to pull out what hair I have left.
Any help suggestions gratefully received
I did get the software from RSW, and the convertor lead is the same as RPI sell on ebay, I am trying to find someone withan old laptop with a serial connection, but no one seems to have one ....:-(
I did get the software from RSW, and the convertor lead is the same as RPI sell on ebay, I am trying to find someone withan old laptop with a serial connection, but no one seems to have one ....:-(
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!