What have you done to your Freelander today

[landowner]

Topped up power steering with speshull Land Rover green stuff from a Landy place.

 

[Hippo]

Washed me windscreen and rear window.

 

[Hippo]

@landowner manuals over ere:

Freelander 2 (LR2) - Freelander 2 repair and maintenance manual

If you can see adverts on this page selling car repair manuals, DONT click on them. They're sneaky adverts from google which detect words used in this fred, on the chance you will be attracted to click on said advert. The adverts are trying to get you to pay for manuals which you can get from...

www.landyzone.co.uk

 

[MGT]

Put prop shaft back on. Decided to do it in pieces instead of assembling on bench. Won't do it that way again.

Big thanks to the guys at Bell Engineering who tested my VCU for me - worth the trip to make sure it was ok as i bought the vehicle with it disconnected.

 

[andyfreelandy]

Won't do it that way again.

Which way? Complete or in parts ?

 

[MGT]

Which way? Complete or in parts ?

In parts. Although I've calmed down a bit now. I put the vcu on first and then put the back section on without realising the front wouldn't then go on. Then when i'd sorted that and got the front and back on I realised i had forgotten to put the bolts and washers in the vcu spline shaft.

On reflection it's probably easer to do it in parts as long as you don't forget those things.

 

[kernowsvenski]

Had to wiggle the small cable on the starter again. Looks like I'll be getting the crimping pliers out soon.