I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I'll drive up to collect and split it with you ...
Its a deal

KevsMoney.jpg
 
Some bits of motorbike injun arrived this morning so I spent a couple of hours fitting a new small end bush in a con rod. Perfect fit for the gudgeon pin before fitting but needs about half a thou reaming out after fitting. But my adjustable hand reaming tool is microscopically just too big to fit the handle. So I need to file a bit off the end of the tool so it will fit the handle. Easy enough - but my file is in my dottir's garage 30 miles away. I'll get it at the weekend. No hurry for this job, as the big end bolts have just departed Los Angeles airport ----
 
I have started selling all my engineering stuff. It's quite upsetting but it's just rusting away not being used.
@DanClarke I sold one of the lathes finally so the garage is looking rather empty!
I feel for you Brian.
Which one? The Raglan Little John?
It must be hard to let such treasures go, but if they are unlikely to get used it is probably the best thing.
I have absolutely no room at the inn. I have to throw a trike out in the rain in order to do any work in my little space. :(
My next house must have a standalone workshop.
 
I feel for you Brian.
Which one? The Raglan Little John?
It must be hard to let such treasures go, but if they are unlikely to get used it is probably the best thing.
I have absolutely no room at the inn. I have to throw a trike out in the rain in order to do any work in my little space. :(
My next house must have a standalone workshop.
No it's the smart and brown, built in 1947 I believe!
 
Back
Top