Weber Carb

[metallicachick86]

Have the opportunity to get a weber carb with adaptor plate for me series 3, but it dont have a choke cable, or anythin else i can spot that you get with a new one, (looking at paddocks and the pic on there)

what do i need? just a choke cable? are the acclerator controls in the same place as a zenith? how easy would putting a new choke be?

tah all

 

[mikebeetle]

throttle is in the same place. The only differance is the choke cable which is a bit longer than standard

 

[metallicachick86]

so thats it just a cable? ace, how difficult is it to change? had a lookie in haynes but its got nothing

 

[The Mad Hat Man]

Dunno if these help?

 

[mikebeetle]

Its a straight swap onto the manifold. From memory the fuel inlet and vacuum attachment are positioned slightly differently. The throttle linkage will line straight up. Just run the new cable and attach it on the same way.
The weber is non standard so you won't see it mentioned in any manual.
When you come to do it you will see how straightforward it is.

 

[The Mad Hat Man]

The weber is non standard so you won't see it mentioned in any manual..

erm!!!! where do yu think i got those pics from?









the Land Rover 90 110 workshop manual - thas where .

downloadable from the usual sites.

 

[oil dripper]

hers got one for her series tis single choke not twin like on a 90

 

[The Mad Hat Man]

I musta missed the bit wot says it was single choke - my series Weber was a twin choke.

 

[oil dripper]

thas a rarity then innit

 

[The Mad Hat Man]

possibly - thas wots good about lz - yu nevva stop learning.



















about the most Extra-ordinary subjects

 

[yella]

ive got a single choke ere on a manifold

 

[Sean]

tis hardly worth the effort changing it for all the difference it would make

 

[cao]

I fitted one that I got from Paddocks and it was just the choke cable that was different as has been mentioned,although it did also have an inline filter supplied in the kit and a few bits of petrol hose and clips.
It was easy to fit and I have been very pleased.
I admit that I am only comparing it to my old carb which was totally shot.

 

[rustyrhinos]

Is that the ICH 34 by any chance? Doesn't the throttle linkage work the other way round to standard?

 

[metallicachick86]

ive got a single choke ere on a manifold

yah do? weber? still working

tah for the help

 

[yella]

if yer want it bex, next time yer in the area call in

 

[Davec]

Is that the ICH 34 by any chance? Doesn't the throttle linkage work the other way round to standard?

Works the same way as a Ser III, but the opposite way to a Ser II

If I remember rightly you also need an adaptor plate for a Ser II as the studs are 90° out. It used to be part of the kit

 

[metallicachick86]

if yer want it bex, next time yer in the area call in

legend thnx mate, will be popping down some weekend soon when bump isnt kickin me bladder to death

 

[yella]

np, im away fer a wik this sat so anytime after that

 

[cao]

Is that the ICH 34 by any chance? Doesn't the throttle linkage work the other way round to standard?

I'm not sure. I don't remember having any problems with the linkage. I have the paperwork though and I will have a look and let you know tomorrow.