I would just like to say

[My Old Landy]

Would this be a nice Valve amp for listening to Vinyl records?

No my friend, a nice 400w linear HF amp so I can talk to the west!

 

[marjon]

Stpped for a brew at Doncaster

You need a few more straps to be sure.

J

 

[marjon]

Hope your mum makes a speedily recovery whith no complications
Could do with some wet stuff here had none for 3 weeks ground starting to crack l bet if you gave him a pouch he would have to be starving to eat it

Sorry to hear about your Mum. I hope all goes well.

thanks guys, she’s a tough old lady, already complaining about the noisey neighbours, it will be the food tomorrow .
Just as concerned about Dad, as he has nobody to boss him around.

J

 

[landowner]

You need a few more straps to be sure.

J

Straps were about 5 metres long so had to wrap the excess around everything

 

[kevstar]

Had the day off today just floated about in the sun chatting to peeps, looked at a wee job for one of the neebs they want
a 200 meter drainage ditch dug around the apple orchard, ordered 7ton of type 1 coming tomorrow & 2 pallets of Indian
slabs coming on friday fink I'll go back to work.

 

[Stone56]

Had the day off today just floated about in the sun chatting to peeps, looked at a wee job for one of the neebs they want
a 200 meter drainage ditch dug around the apple orchard, ordered 7ton of type 1 coming tomorrow & 2 pallets of Indian
slabs coming on friday fink I'll go back to work.

You have to be careful its a fine line we walk you know when you start it and think do I need this

 

[Stone56]

Morning all hope you are all well started to economy's on the Yorkshire brews stock of bags getting low, and the stuff we get here is like pee water the upside I get to have more beer have a good day each day only comes once

 

[Turktowner]

Mornin folks.
Motybike MOT today.
Would you believe it, one of the indicators decided to act up just as I arrived at the station!
Fink it'll be okay, i gave it a wiggle..

 

[Hippo]

 

[marjon]

Morning all hope you are all well started to economy's on the Yorkshire brews stock of bags getting low, and the stuff we get here is like pee water the upside I get to have more beer have a good day each day only comes once

We use british corner shop, for my tea bags cos its the same here. Pretty much only flowery stuff but no decent black tea.

J

 

[My Old Landy]

Morning all, been up and playing radio this morning
Just got Qatar, really strong, makes 97 different countries in 10 weeks on my 2E0 call sign!
Just over 2,000 contacts too.
I am looking forward to the extra 350w the new call sign and an amplifier will bring

 

[Stone56]

We use british corner shop, for my tea bags cos its the same here. Pretty much only flowery stuff but no decent black tea.

J

didn't think of that thanks will give it a go

 

[Stone56]

Morning all, been up and playing radio this morning
Just got Qatar, really strong, makes 97 different countries in 10 weeks on my 2E0 call sign!
Just over 2,000 contacts too.
I am looking forward to the extra 350w the new call sign and an amplifier will bring

Opened up a whole new world

 

[Stanleysteamer]

No, design is the same, I just did not realise how badly it would likely affect a drive dog.
I shall find an alternative approach.

Sorry not to have put pics up, I was just so ticked-off I put it all away.

Did I tell you that my big weed whacker has a primitive locker on the rear axle?
Normally the wheels turn as driven by a chain, but they are a little bit independent. In the middle there is a disc with a single pin in it which if one wheel is spinning eventually hits up against another pin and then this forces the spinning wheel to lock to the other wheel, or rather the two shafts, if you see what I mean. So the shaft spins nearly 360 before this happens, I just have to wait patiently until this happens and it then drives off! I am now wondering if you cannot make a couple of discs with dogs on to make it work, bit like a crash box.
As all are saying, a few pics might help.
Sorry if my explanation is rubbish and short on technical terms.

 

[Stanleysteamer]

No, design is the same, I just did not realise how badly it would likely affect a drive dog.
I shall find an alternative approach.

Sorry not to have put pics up, I was just so ticked-off I put it all away.

This no use then?

Sturmey Archer 3 Dog Drive Flat HSL Sprocket 1/2x1/8" Chrome

HSL848 - 3 dog drive sprocket. 1/2 x 1/8". Flat.

www.bornbiking.uk

 

[Stanleysteamer]

thanks guys, she’s a tough old lady, already complaining about the noisey neighbours, it will be the food tomorrow .
Just as concerned about Dad, as he has nobody to boss him around.

J

Also hope all this sorts itself out soon!

 

[Stanleysteamer]

We use british corner shop, for my tea bags cos its the same here. Pretty much only flowery stuff but no decent black tea.

J

France - strong decent coffee, tea like wee-wee.
England - strong, decent tea, coffee bitter and or like wee-wee.
So guess what we take with us in each direction.

and yes Yorkshire Tea rules!!!

 

[Turktowner]

Did I tell you that my big weed whacker has a primitive locker on the rear axle?
Normally the wheels turn as driven by a chain, but they are a little bit independent. In the middle there is a disc with a single pin in it which if one wheel is spinning eventually hits up against another pin and then this forces the spinning wheel to lock to the other wheel, or rather the two shafts, if you see what I mean. So the shaft spins nearly 360 before this happens, I just have to wait patiently until this happens and it then drives off! I am now wondering if you cannot make a couple of discs with dogs on to make it work, bit like a crash box.
As all are saying, a few pics might help.
Sorry if my explanation is rubbish and short on technical terms.

That's basically how a diff works intit? Just more pins, so to say..

 

[Hippo]

 

[Hippo]