What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MOT passed yesterday after having new front ball joints, anti roll links, rear lines, tracking done and new tyres
 

Attachments

  • BCAD92FD-E6EF-407E-A3C2-D8C7C71A9865.jpeg
    BCAD92FD-E6EF-407E-A3C2-D8C7C71A9865.jpeg
    341.5 KB · Views: 82
  • 897FABC8-CF09-4960-825E-668D43C2980A.jpeg
    897FABC8-CF09-4960-825E-668D43C2980A.jpeg
    286.6 KB · Views: 80
  • 36FE0030-26F1-4D2F-AD04-E9560A64A166.jpeg
    36FE0030-26F1-4D2F-AD04-E9560A64A166.jpeg
    246.2 KB · Views: 92
  • 19BA9C44-842C-45E8-8AC9-D7BCEE99A48C.jpeg
    19BA9C44-842C-45E8-8AC9-D7BCEE99A48C.jpeg
    392 KB · Views: 80
  • C2DFDDE0-9D6F-4281-9C0D-E6D03935D477.jpeg
    C2DFDDE0-9D6F-4281-9C0D-E6D03935D477.jpeg
    324.5 KB · Views: 86
  • B3B1CA6A-4EA8-4168-BD4B-0CC34E841DFD.jpeg
    B3B1CA6A-4EA8-4168-BD4B-0CC34E841DFD.jpeg
    217.5 KB · Views: 90
Sorted an iffy rear indicator bulb holder, and put £115 of diesel in it
It's frightening how expensive diesel is becoming, it's now about £9 per gallon, which makes my FL2 pretty expensive to run locally on a per mile basis.
Then I picked up my daughter from uni a few weeks ago, it was £130 to fill the tank, although it does do the round trip to Cardiff on under a tank, which is nice. :)
 
Not today but a week or so ago. Made it a twin engine for a short time.
Bringing a 2.5NA that work needed up from Devon. Gained some extra character scratches getting this one in. I think I was starting to get near the limits of what the rear floor could support!

As you can see I have already been doing some weight reduction by getting rid of some trim panels to make up for it.
 

Attachments

  • PXL_20220617_160228624.jpg
    PXL_20220617_160228624.jpg
    297.1 KB · Views: 68
Needed a service as we primarily use it as a tow car for the caravan going from Sussex to Scotland a couple of times a year and the next trip is coming up. The last trip saw us lose all brakes when a hose was cut by rubbing on the disc (I blame the mob I bought it from as it was the corner they rebuilt but cannot prove anything) but fortunately we had just pulled up at the campsite so minimal drama. There was no service history with it when I bought it and even my 'local' LR dealer struggled to find anything so I figured go full beans on the servicing and just swallow the cost.
Needed to add new track rod ends and read brake discs to the service cost so was not cheap but now happy that we are fit to go.
 
Decided to give my Haldex and rear diff a service, as it's been about 16 months and 5k miles since I rebuilt the replacement diff (which reminds me that I must do the rebuild guide:oops:), and as the Haldex is causing a grabbing when tuning on lock, I thought I'd take a look.
The Haldex is a pain to service in the vehicle, but also a pain to remove, so I decided I'd struggle with getting the pump and filter out with it in situ.
The Haldex fluid came out darker than it when in, which isn't a surprise. The pump pre-filter gause wasn't really very dirty, but was cleaned with brake cleaner anyway. I also hooked the pump to my bench power supply, as I'd not tested it while I had the Haldex out last year. Thankfully the pump worked at 12 Volts, drawing just under 1 Amp while running, so I figured that was OK.
I didn't bother replacing the filter, as the pre-filter was so clean.
I refilled it with fluid to the filler plug, and then set the level by drawing 70ml back out.

The diff was a bit of a concern though. When I removed the magnetic drain plug, I was shocked to see the magnet had picked up metallic fuzz.:eek:
20220709_151240.jpg
Not much, but I'd have expected to see almost nothing.

Also the oil came out with that horrible metallic sheene, which is indicative of wear.:mad:
20220709_162833.jpg

I rebuilt the rear diff exactly to the official LR rebuild instructions, so I was a bit alarmed to see it wearing after just 5k miles. I used top quality oil, which I know to be very good at protecting moving gears and bearings.

I've refilled it with the same high quality oil, in the hope that the metal is just the new bearings bedding in, although that seems unlikely.
I think I'll be changing the oil annually, even if just to keep the particulates down to minimum levels.
 
Each oil change I swap the tyres from front to rear and vice versa trying to achieve 'even' tyre wear. My spare tyre is still brand new. I moved the rear wheels to the front and one front to the rear, the other I've mounted as my spare. The new tyre I've fitted to the rear driver's side. New tyres should go on the rear in a FL. That new one on the back axel with one that's about half worn should be alright shouldn't it?

I also replaced my A/C and alternator belt tensioner pulley as the old one was the original from 1998! It was getting quite noisey.
 
Back
Top