- Posts
- 41,303
- Location
- East Dorset
I use Chrome at the mo, but could try another one.
Thanks for the suggestion.
(you unnerstand all this sh!te much better than I do!!!)
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks for the suggestion.
(you unnerstand all this sh!te much better than I do!!!)
- Posts
- 41,303
- Location
- East Dorset
- Posts
- 66,504
- Location
- The Wooly Witch
Morning all …
breezy still out there …
breezy still out there …
doriz
Well-Known Member
- Posts
- 16,782
Well it’s Monday and that means the start of a couple of days work - dark and cold out, so much so the dogs just buried their heads in their baskets when offered the chance go out for a lash
- Posts
- 8,716
- Location
- Solent
Mornin.
Back toowit today, but not toowoo.
Have a good one
Back toowit today, but not toowoo.
Have a good one
- Posts
- 41,303
- Location
- East Dorset
Feckin dark and p!ssing it down here.
Just my luck i have to empty the Disco before taking it into Bmuff to get the gearbox fixed.
Just my luck i have to empty the Disco before taking it into Bmuff to get the gearbox fixed.
- Posts
- 13,658
- Location
- The Principality
It is now light although it looked better when it was too dark to see - wet!
I wish my wee dog would choose his bed instead of going out to get wet.
I cannot see any reason for enjoying your Monday - except many of you will get paid for going to work.
I wish my wee dog would choose his bed instead of going out to get wet.
I cannot see any reason for enjoying your Monday - except many of you will get paid for going to work.
- Posts
- 21,212
- Location
- In the next Glen
Morning all eye is a tad late I let the fire go out so the house is a tad cooler
Appy Monday peeps I'll catch up later ave a good week.
Appy Monday peeps I'll catch up later ave a good week.
- Posts
- 15,181
- Location
- Benfleet, Essex
Morning All
A cool morning today. NO papers...AGAIN!
Bone crackers at 10:30, will discuss my awful night with him I think.
I'm now getting the numb arms not when I wake up, but about 10 minutes after I lie down (which seems worse to me).
Hey-Ho, have a lovely day!
A cool morning today. NO papers...AGAIN!
Bone crackers at 10:30, will discuss my awful night with him I think.
I'm now getting the numb arms not when I wake up, but about 10 minutes after I lie down (which seems worse to me).
Hey-Ho, have a lovely day!
doriz
Well-Known Member
- Posts
- 16,782
How did that happen. I was 56 licks away from 17k and have now smashed through it without noticing takes me back to when the speedo gets to 88887 miles for example or in the case of my Defenderer 222.222 being the next biggy
takes me back to when the speedo gets to 88887 miles for example or in the case of my Defenderer 222.222 being the next biggy
- Posts
- 15,181
- Location
- Benfleet, Essex
...that the back-cracker says that I am a dick.
He says there is no point in him trying to fix me if I just undo all the fixing immediately afterwards with things like heavy DIY/Fencing etc.
Also says the neurological damage will take many months to fix (18 months was mentioned).
While he is happy to keep taking my money he says he would rather we got down to a once a month visit instead of these 12 times a month sessions.
So, it looks like I shall have to refrain from DIY duties for some while.
He says there is no point in him trying to fix me if I just undo all the fixing immediately afterwards with things like heavy DIY/Fencing etc.
Also says the neurological damage will take many months to fix (18 months was mentioned).
While he is happy to keep taking my money he says he would rather we got down to a once a month visit instead of these 12 times a month sessions.
So, it looks like I shall have to refrain from DIY duties for some while.
- Posts
- 41,303
- Location
- East Dorset
...that it stopped raining when I went to clear the Disco out.
Took it to the indy guy. He asked me if "I had got any seals" so I reminded him that last time he said it wouldn't need any. He looked a bit bemused.
Told him about the "thrum thrum" so he'll have a look at that too.
Went to auction peeps and picked stuff up.
From a lot of about 6 clocks we only wanted one, so put the rest back in.
Once home it will not really run except horizontally.
I joked we should put it on the ceiling.
Anyway to take the fecker apart I need a special thin walled 5 mm socket. Never needed a socket before, never mind one that'll go down a hole only fractionally bigger than the nut.
Had a look ont internet, none of em give the outside dimension.
Course if I had a lathe I'd stick one of my thick walled ones in and turn it down.
No lathe, no fixee!
Have a nice day peeps!
Took it to the indy guy. He asked me if "I had got any seals" so I reminded him that last time he said it wouldn't need any. He looked a bit bemused.
Told him about the "thrum thrum" so he'll have a look at that too.
Went to auction peeps and picked stuff up.
From a lot of about 6 clocks we only wanted one, so put the rest back in.
Once home it will not really run except horizontally.
I joked we should put it on the ceiling.
Anyway to take the fecker apart I need a special thin walled 5 mm socket. Never needed a socket before, never mind one that'll go down a hole only fractionally bigger than the nut.
Had a look ont internet, none of em give the outside dimension.
Course if I had a lathe I'd stick one of my thick walled ones in and turn it down.
No lathe, no fixee!
Have a nice day peeps!
- Posts
- 13,658
- Location
- The Principality
...that the back-cracker says that I am a dick.
He says there is no point in him trying to fix me if I just undo all the fixing immediately afterwards with things like heavy DIY/Fencing etc.
Also says the neurological damage will take many months to fix (18 months was mentioned).
While he is happy to keep taking my money he says he would rather we got down to a once a month visit instead of these 12 times a month sessions.
So, it looks like I shall have to refrain from DIY duties for some while.
At last! Three cheers for the back'cracker (ugh)
- Posts
- 13,658
- Location
- The Principality
I've got a PROXXON micro DB 250 ............... sadly it is a woodworking lathe!...
No lathe, no fixee!
Have a nice day peeps!
- Posts
- 31,467
- Location
- North Shropshire
eBay has just told me i need to buy a UJ for a freelander 1
Ferfoooksake
Ferfoooksake
- Posts
- 8,716
- Location
- Solent
My friends, I give you the Swedish prawn, peanut, curry and banana pizza. (It's a ting, y'know..)
- Posts
- 41,303
- Location
- East Dorset
- Posts
- 66,504
- Location
- The Wooly Witch
...that the back-cracker says that I am a dick.
He says there is no point in him trying to fix me if I just undo all the fixing immediately afterwards with things like heavy DIY/Fencing etc.
Also says the neurological damage will take many months to fix (18 months was mentioned).
While he is happy to keep taking my money he says he would rather we got down to a once a month visit instead of these 12 times a month sessions.
So, it looks like I shall have to refrain from DIY duties for some while.
I think we did mention this, in our joint capacity as in-house moaning Minnies
- Posts
- 41,303
- Location
- East Dorset
TBH, I feel a bit sorry for him, bit like a Grand Prix mechanic, "You bust em, we fix em, you bust em again"At last! Three cheers for the back'cracker (ugh)
Or an air mechanic in either WW! Still has as much pride in his work as they all did!
Similar threads
