What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Indeed, I have been taught by the best afterall ;) not bad for 26 and standing a year
View attachment 247247
problem is my own personal list of what I want to do is far greater since.
And I’m never doing a windscreen again!

Problem for today is my battery box got obliterated some time ago, now have new clamp (thanks Alan) but rod doesn’t reach??
View attachment 247239 View attachment 247241
As you can see it is still bent, maybe the end snapped off? Not case of bending theclamp - the rod is below the battery?
If I push down on it feels like it pushes against the arch liner but won’t come up. Not taking liner out til I have fluid to do Bix’s calliper.
Still soaking the rear UJ and scraping the crud out as it’s eaten away by the penetration fluid. Got set of 4 new circlip pliers, one for every clip :D
I think if you take the battery out you can unscrew the rod,it does look a bit short so straightening it may help or replace it with a piece of studding.
 
I have GKN to go in. old UJ is rusted in solid I greased it but its rumbling. Got no way of getting heat on it bar lighting small fire under the fuel tank :eek:
I'd say take the prop off and do the work off the vehicle. Makes it 100% easier. I had to use the press at work. Just make the slip joint so when the shaft inevitable falls apart you can reassemble it.
 
Mostly scrubbing and scraping at the masses of baked on yuck in the rocker covers and liners - improved but still a long way to go. Wife worked on the block cleaning and bits of engine bay as she has more patience with fiddly / delicate bits than me. We make a good team. Hopefully the weather will hold and we will get a lot further forward this week, although I am working and we are both being beaten by the chiro on Thursday.
 
Mostly scrubbing and scraping at the masses of baked on yuck in the rocker covers and liners - improved but still a long way to go. Wife worked on the block cleaning and bits of engine bay as she has more patience with fiddly / delicate bits than me. We make a good team. Hopefully the weather will hold and we will get a lot further forward this week, although I am working and we are both being beaten by the chiro on Thursday.

Dishwasher?
 
Back
Top