Henry_b
Think outside, no box required.
- Posts
- 15,354
- Location
- somewhere else
pfft that isn't a nice place for a leak!Think i found the lpg leak!! From the top of the injectors,!!!
pfft that isn't a nice place for a leak!Think i found the lpg leak!! From the top of the injectors,!!!
At least they are ready to get to for stripping, cleaning etc. What was more worrying, turned the ignition off and at least some of them were playing a merry tunepfft that isn't a nice place for a leak!![]()
It would look better if i could spray paint the parts, hopefully it will drive like new all 4 front radius arm bushes were shotthe inner sleave was not attached to the rubber so the arm were free to move side to side only mot late December
i have the tool to push the bushes in which makes it a doddle, so if yours need doing give me a shout.
I suspect my rears probably need looking at. Did the fronts years ago.
It would look better if i could spray paint the parts, hopefully it will drive like new all 4 front radius arm bushes were shotthe inner sleave was not attached to the rubber so the arm were free to move side to side only mot late December
i have the tool to push the bushes in which makes it a doddle, so if yours need doing give me a shout.
For that sort of thing I think you are better off brush painting, tend to get a thicker paint film on them, and it don't matter a toss if you get brush streaks does it.
Who did them for you buddy???Got my 2 keys paired them to the old bus,..
Now I have central locking which beats locking it with the key like a peasant!![]()
"second-remote-repairs" on UK Ebay.Who did them for you buddy???
Just be sure to use OEM rubber not polys.Think i need to replace the radius arm bushes, drivers side has wandered off centre, can't be healthy
just up the road from me is a TD6 L322 which has been for sale for around 2yrs it started at around £3000 it's been steadily sagging for months it is now on its bumpstops and the price too has sagged to £600
I'm tempted.
Guessing i might as well replace all 3 and do both arms while I'm at it. Not hot a press, will i manage with a vice?Just be sure to use OEM rubber not polys.
Guessing i might as well replace all 3 and do both arms while I'm at it. Not hot a press, will i manage with a vice?
2mm is huge! was that a typo? no way a jubilee clip will compress the outer metal sleeve of a bush? or do i need extra weetabix?You will need to use jubbly clips or some such thing round the bush as the bush is 2mm bigger than the arm so they need to be forced smaller as they are pushed in, if you can get a tapered sleave made to push umm through
i nearly bought a second hand set of arms off ebay for £40 to refurb and fit and then would have a set of arms to refurb ready for someone else but i think the postage costs for the arms would not be cheap![]()
Eat the whole box of bix then try mate. LOL, then factor in a long toilet break about an hour afterwards. LOL2mm is huge! was that a typo? no way a jubilee clip will compress the outer metal sleeve of a bush? or do i need extra weetabix?![]()
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!