Defender LT77 box problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gary brion

Active Member
Posts
167
Location
piddington bucks
I just picked up a defender 90 on an lt77 box, all really good except its really difficult to go into gear
especially coming down the box into 2nd, other than that the box shows no sigh of milage any ideas guys
 
Probably worn baulk ring, But do change the fluid [ check what comes out for bits ] A change of fluid will help [ you don't know what is in there, could be wrong stuff ] Also give it a tad of more time on the change, a blip change [ pause and blip throttle ] as you go down can help an old box keep going.
 
Good I will drain it out and see, I have come across one with ep90 in the gearbox before
the only other thing I'm thinking is someone has badly fitted one of those short shifts and need some adjustment, as the shifts do seem like they are on top of each other
Best Regards
 
I can't go from 3rd to second on mine, but I've never needed to so it doesn't really matter
 
Back
Top