What did you broked on your RangeRover today

[tomcat59alan]

It might be a feature that can be enabled/disabled, I don't remember.

I think you can set the length of time of the delay, busy atm to check the manual.

 

[brianp38dse]

I think you can set the length of time of the delay, busy atm to check the manual.

More painting could be worse i have got to go out and change a ballvalve in a loft for a customer in this sweltering heat i may resemble a rather wet thing when i am done and be about a stone lighter

 

[Datatek]

More painting could be worse i have got to go out and change a ballvalve in a loft for a customer in this sweltering heat i may resemble a rather wet thing when i am done and be about a stone lighter

I like the French system better, no ball cocks apart from toilet cisterns.
Sunday call out so should at least be profitable

 

[tomcat59alan]

More painting could be worse i have got to go out and change a ballvalve in a loft for a customer in this sweltering heat i may resemble a rather wet thing when i am done and be about a stone lighter

I was busy changing the thermostat cartridge in the shower . Lovely.

 

[brianp38dse]

I like the French system better, no ball cocks apart from toilet cisterns.
Sunday call out so should at least be profitable

Its a job for a friend

 

[brianp38dse]

I was busy changing the thermostat cartridge in the shower . Lovely.

Hope it was not a recessed Aqualisa one they can be a pain with the o ring at the back, which would be ok if you were a trained gynecologist

 

[tomcat59alan]

Hope it was not a recessed Aqualisa one they can be a pain with the o ring at the back, which would be ok if you were a trained gynecologist

It was Brian, sounds like you have had the experience yourself Job jobed

 

[brianp38dse]

It was Brian, sounds like you have had the experience yourself Job jobed

Yep been there done them loads of times, they recon a crochet hook but dental picks work well, the putting back is fun

 

[tomcat59alan]

From the manual it looks like you can turn it on or off,pre set time of 25 secs

 

[Datatek]

From the manual it looks like you can turn it on or off,pre set time of 25 secs

I thought it was an on/off option but I don't remember things I don't need to change these days

 

[Tenebreaux]

Put the battery on, I have beeps!

But I have the keycode lockout message. Do I need to wait 30 mins or can I enter the code with the nano straight away? @Datatek

 

[Grrrrrr]

From the manual it looks like you can turn it on or off,pre set time of 25 secs

So if headlamp delay is off then the lights just stay on? Probably worth enabling that feature!

 

[Tenebreaux]

So if headlamp delay is off then the lights just stay on? Probably worth enabling that feature!

Just tried it. My lights stay on if the switch is on. Have to turn the lights off for the headlight delay function to work.

 

[Datatek]

Just tried it. My lights stay on if the switch is on. Have to turn the lights off for the headlight delay function to work.

Yes that is correct, turn the lights off while the ignition is on for headlight delay, use it a lot here to get from the parking to the outside light sensor.

 

[Tenebreaux]

Anyone know how to get Gorilla Foam Filler off your hands without using a flap wheel? Asking for a friend.

 

[Dopey]

Anyone know how to get Gorilla Foam Filler off your hands without using a flap wheel? Asking for a friend.

Try IPA

 

[Tenebreaux]

Try IPA

Not sure I have any. Still got a couple of bottles of Hobgoblin left...

 

[Dopey]

Cut your fingers off, ring 999 and they will sort it

 

[Dopey]

But... how to ring 999 with no fingers???

 

[Datatek]

Anyone know how to get Gorilla Foam Filler off your hands without using a flap wheel? Asking for a friend.

Acetone takes a lot of things off, no idea if it works on foam filler though.