What does this canvas fit?

[Rodeo Joe]

https://www.ebay.co.uk/itm/LAND-ROVER-SERIES-2-109-CANVAS-ROOF-WITH-BARS-ORIGINAL-M-O-D/164219719554?hash=item263c420f82:g:ZP0AAOSwufFezQHa&LH_Auction=1
Saw this and wondered what its from, its described as series 2 109 truck cab but looks nowhere near long enough and has the overcab piece on it anyway. Is it 88".

 

[Blackburn]

The piece you think is the roof goes down the cab rear not long enough for roof section.

 

[Shippers]

That is not as described in advert...
First pic shows on right ..cab roof...on left..rear with window...top and bottom...side panels showing to left the overflaps for rear window panel...to many hoops and also says side window needs replaced there is no side window...

 

[Rodeo Joe]

The piece you think is the roof goes down the cab rear not long enough for roof section.

Its got the fittings on it to hook onto the sharks tooth bar.
Anyway I don't think the seller knows what it is if he thinks the side window is actually the rear one.

 

[John S]

If it’s got the sharks teeth front it’s too short for a 109 truck cab but it seems to have enough sticks for a 109 cab. It’s not got the front sticks for the full tilt. Looks like a mish mash.

 

[Shippers]

If it’s got the sharks teeth front it’s too short for a 109 truck cab but it seems to have enough sticks for a 109 cab. It’s not got the front sticks for the full tilt. Looks like a mish mash.

Have you read the ebay description?...it says its the canvas for the rear of an mod 109 truck cab why would it have the sharks teeth fitment clearly seen in the photo of it upside down...no side window either...

 

[John S]

Have you read the ebay description?...it says its the canvas for the rear of an mod 109 truck cab why would it have the sharks teeth fitment clearly seen in the photo of it upside down...no side window either...

Yes I’ve seen and I’ve got one (SWB) . You’re right it doesn’t have side windows; it’s what I said; the canvas is for a SWB but the sticks are sort of for a 109 but not full tilt just a pick up. It’s a muddle offer.

 

[John S]

Okay, have a look at these.

 

[Shippers]

Yes I’ve seen and I’ve got one (SWB) . You’re right it doesn’t have side windows; it’s what I said; the canvas is for a SWB but the sticks are sort of for a 109 but not full tilt just a pick up. It’s a muddle offer.

The canvas is for a SWB what according to you...the description says truck cab does it not?

 

[John S]

The canvas is for a SWB what according to you...the description says truck cab does it not?

FFS. Are you labouring a pointless point, the description says truck cab for a 109. It’s not that? The advert is misleading, duh!

 

[Shippers]

If it’s got the sharks teeth front it’s too short for a 109 truck cab but it seems to have enough sticks for a 109 cab. It’s not got the front sticks for the full tilt. Looks like a mish mash.

Thats where you were getting me confused...was only replying dont get upset...

 

[dag019]

it is missing the shark tooth rail and the over door pieces:

It also has too many hoops to be a 109, and not enough the cross brace side side pieces, even if it was for a truck cab and was just the load bay cover it is mising the peices that attache the canvas to the back of the truck cab.

I think the reality of it is is it is an incomplete 88 hood frame (missing the over door sections), with some extra hoops (for some reason), and a very very old and worn 88 canvas.

 

[tottot]

The canvas is for an 88 truck cab. [ and it is well past its sell by date ]

 

[dag019]

The canvas is for an 88 truck cab. [ and it is well past its sell by date ]

I agree that is is well past its sell by date but I do not agree it is for a truck cab. I think it is just a standard 88 canvas with plain sides rather than windows. It is not either of these which would be for a truck cab:

 

[Shippers]

Agree a bog standard 88 tilt...