P38A You wouldn't believe it....now with necrophilia? What the...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
IMG_20190306_094944.jpg

Nice.... But a plastic impeller...
But then my last unit was an SKF unit in plastic and it was the bearing that failed after two year!!.
Anyhow, slowly but surely and after three weeks..... "I WANT MY '38 BACK"......:mad:
 
Datatek said:
Should have bought a metal one from Island 4 x 4.
Click to expand...
Morning Keith, I know, but all my parts through the business come from over here and I can benefit from the delivery at the same time I place orders.:cool:
If its only going to last two years then it could be a doltz unit!!:eek:
 
Mark Piercy said:
Morning Keith, I know, but all my parts through the business come from over here and I can benefit from the delivery at the same time I place orders.:cool:
If its only going to last two years then it could be a doltz unit!!:eek:
Click to expand...
Trouble is, failure can cook the head. When the impeller breaks up the overheat is instant:eek:
 
Plastic will work fine. Only reason I had a metal was peace of mind to the fact if it goes after many tens of thousands of miles, I don't want chips of plastic going down inside the ports. My bearings blew apart and went through new rad with viscous, managed to limp mile or so to safety. Head now sounds bit rattly since but good flush should sort that.
 
Update!
New pulleys, all febi bilstein this time. Hopefully for longer than two years! New belts and a new water pump.
I had to charge it up using my Volvo and it's monster battery.
It took forever to start... But worried... Then she fired up! Very happy. Left it running and then it dropped a cylinder and started popping through the air filter box... Oh sh8t... I rushed to stop the engine.... At this point I laughed and excepted the fact the engine may have been buggered when the rad split due to cracked head or gasket failure at the time the rad burst...
So reluctantly I started her up again to check in the air box for the noise... And..... It ran like it should???
So after nearly four weeks of not running, fuel starvation as it on the reserve and on a slight slope and a touch of lazy camshaft follower and then all good in the world.:cool:












For now:eek::p
 
weekend mud bashing after a coupe of days getting over the fear of misfiring.. at the end of the day its a bloody car and it still manages to create a level of uncertainty...ok stop it.... ive been to bloody Italy in it and back along with other bods here who are clocking massive miles on theirs.
I endeavour to do the same with mine.... now shut the hell up with guns... get a gun hotel room..:p:cool:
 
Morning! The engine sounds exactly the same as before, apart from its scary fit!! It's around 204,000mls.;)
I'm going to have it running again this afternoon and see if everything is ok before I put it back on the road for the weekend.:cool:
 
You must log in or register to reply here.

Similar threads

T
Creative air con installation
Replies
4
Views
291
lynall
L
D
L320 TDV6 multiple issues at once with power drop
2 3
Replies
43
Views
2K
Graculus
Graculus
Graculus
L405 Engine oil leak / fumes in cabin
Replies
10
Views
612
marjon
marjon
C
New to LR ownership with a 2006 Vogue with a few issues to sort.
2
Replies
21
Views
2K
calskil
C
T
No compression after HG change
Replies
12
Views
1K
TwoHundredTeeDeeEue
T
Back
Top